![pin punch home depot pin punch home depot](https://images.thdstatic.com/productImages/4e88a09a-04a6-40a0-a17f-472ef5fa04fa/svn/punches-nail-setter-sets-61135-1d_600.jpg)
Tekton also includes 2 “solid” punches and a center punch in their gunsmith punch set. Using them on solid pins can damage the pin, the roll pin punch, or both. They have a small protrusion at the center of the tip, for supporting the hollow walls of roll pins from the inside. You should not use a roll pin punch on solid pins. Roll pin punches are the better choice for pushing out roll pins. Pin punches are used for pushing out solid pins, metal dowels, and other such materials. If you want to reuse a roll pin, you’ve got to use a roll pin punch, and even then there’s no guarantee that you won’t damage them. You could sometimes use a regular pin punch on roll pins, which are hollow-centered cylindrical spring pins with a split down one side, but not without damaging them.
#PIN PUNCH HOME DEPOT PLUS#
The 18-piece gunsmith punch set (66564) comes with the same punches as included in the 7-piece pin punch set, plus the same pinches as included in the 7-piece roll pin punch set, plus a 1/4″ roll pin punch, 1/16″ and 3/32″ solid punches, and a 5/16″ center punch.īuy Now(via Amazon) Pin Punch vs. What’s the difference between a pin punch and a roll pin punch? More on that in a bit. Instead of 1/4″ size as with the pin punch set, it comes with a 5/64″ punch size. The 7-piece roll punch set (66536) comes with sizes 1/16″ to 7/32″: The 7-piece pin punch set (66533) comes with sizes 1/16″ through 1/4″: In general, pin punches are used to remove internal cylindrical components from their assemblies, typically with a hammer (ball pein or similar) used to provide the driving force.
![pin punch home depot pin punch home depot](https://images.thdstatic.com/productImages/129362f6-e8d8-4253-8ff2-561c33b45b4a/svn/capri-tools-punches-nail-setters-cp21050-64_1000.jpg)
![pin punch home depot pin punch home depot](https://m.media-amazon.com/images/S/aplus-media/vc/dd8c7ddf-43ed-4e71-a27e-00b1eff6c549.__CR0,0,300,400_PT0_SX300_V1___.jpg)
Pin punches are great problem-solvers, and if you’ve never used them before I encourage you to keep this information in the back of your mind. This way, there’s less potential for a punch’s shaft to be frictionally stuck inside a like-sized hole when punching out a part. As Jerry pointed out in a comment, a tapered tip would be slightly narrower than the shaft, while a reverse tapered tip would be slightly wider than the shaft. All of the punches feature reverse-tapered (slightly narrower wider) tips, hexagonal shafts, and what looks to be laser-etched markings.